DMQ QC3 F Coating Thickness Gauge

Only by Request

Ferrous Base

The DMQ QC3 F is our most popular separate probe coating thickness that is supplied with a standard straight Ferrous probe (extended range and miniature probes are also available) to measure coatings and platings applied over Ferrous or magnetic substrates.

The gauge features 3 simple to follow step-by-step calibration modes, a large LCD display, statistics and much more.

Measuring

  • Ferrous Base
  • Eddy Current
  • Range:
    0 – 1500µm
    0 – 60Mils
  • Resolution:
    Up to 99.9µm, 0.1µm
    Up to 4.99Mil, 0.01Mil Above 100µm, 1µm
    Above 5Mil, 0.1Mil

Calibration

  • 3 step by step calibration modes

Units

  • Metric (µm)
  • Imperial (Mils)

Graphic LCD Display

  • LCD 128×64 pixels
  • LED backlight illumination
    (ON, OFF, Auto)
  • Digits:
    17mm / 0.66in tall
  • Adjustable digital contrast

Multi-Language

  • English
  • Spanish
  • Portuguese

Features

  • Coupling indicator
  • Capture minimum
  • Statistics
  • Continuos measurements

Model Upgrade Licenses

  • Upgrade to a QC3 DLF with the purchase of a model upgrade license

Data Logger

  • 5000 readings that can be viewed on the unit screen
  • Data cannot be transferred to a PCTo transfer data to a PC upgrade to a QC3 DLF

Connections

  • Type Lemo “0B” connector for probe
  • The USB port can be used if upgrading to a QC3 DLF

Alarms

  • Low & High, user defined
  • Alarm types
    Visible: Flashing backlight and irregular digits
    Audible: Intermitent beep

 

Warranty

  • 5 year limited on electronics
  • 6 months on accessories

Front Panel

  • Touch-Sense with sensitivity adjustment
  • No mechanical parts
  • Auto pressure recognition
  • Auto scrolling recognitio

Power Supply

  • 2 x AA 1.5v Alkaline
  • 2 x AA 1.2v Ni-MH Rechargeable
  • Easy slide battery compartment cover

Dimensions

  • H: 117mm / 4.60in
  • L: 78.74mm / 3.10in
  • W: 24mm / 0.94in

 

DMQ QC3 F standard configuration

DMQ QC3 F electronic unit
DMQ straight Ferrous probe
Ferrous base
3 shims for calibration
Printed user manual
High impact carrying case
Certificate of conformity

Measuring

Method:
Eddy current
Range:

0 to 15mm / 0 to 5.905in
*Depending on probe and material
Resolution:
Up to 99.9µm, 0.1µm or up to 4.99Mil, 0.01Mil
Above 100µm, 1µm or above 5Mil, 0.1Mil
Precision:
±1 at 3% +2μm (+0.07Mil) *Depending on probe
Measuring Velocity:
Approximately 99 measurements per minute

Units

Metric:
Microns (µm)
Imperial:
Inches (Mils)

Calibration

Modes:
Base and one point
One point
Base only

Features

Coupling:
Coupling indicator
Capture Minimum:
Holds minimum value

Statistics

Types:
Maximum, Minimum, Range, Average

Alarms

Low & High:
User defined value
Alarm Types:
Visible: Flashing backlight or irregular digits
Audible: Intermitent beep

Display

Digits:
17mm / 0.66in tall
Graphic LCD:

128×64 pixels
Viewable Area:
45 x 30mm / 1.77 x 1.18in
Backlight:
LED backlight (ON, OFF, Auto)
Contrast:
Digital 30 steps

User Interface

Languages:
English, Spanish, Portuguese
Menu Screens:
Icon based

Warranty

Electronic Unit:
5 year limited
Probes:
6 months

Probe

Types:
Straight Ferrous (standard)
Probe Range:

Ferrous, 0 to 1500µm or 0.025 to 19.999in
Resolution:
Up to 99.9µm, 0.1µm or up to 4.99Mil, 0.01Mil
Above 100µm, 1µm or above 5Mil, 0.1Mil
Material Base:
Ferrous: Iron, Steel, Magnetic Stainless Steel
Minimum Base Thickness:
Ferrous: 0.3mm or 0.01in
Minimum Convex Radius:
Ferrous: 2mm or 0.07in
Minimum Concave Radius:
Ferrous: 25mm or 0.98in
Minimum Sample Diameter:
5mm or 0.19in

Data Logger

Storage:
Up to 5000 readings that can be viewed on the unit screen
Data Transfer:
NOT AVAILABLE
Capture Modes:
Manual: touch the Store key
Automatic: automatic while the probe is coupled

Model Upgrade Licenses

Upgrade to a QC3 DLF with the purchase of an upgrade license

Connect to PC

Connectivity:
USB (cable included) or RS232 (optional cable)

Front Panel

Touch-Sense Keypad:
No mechanical parts
Keypad:
Sensitivity adjustment
Auto pressure detection
Auto scrolling detection

Electronic Unit

Dimensions:
H: 117mm / 4.60in
L: 78.74mm / 3.10in
W: 24mm / 0.94in
Weight:
200g / 7.05oz with batteries
Working Temperature:
-10°C to 50°C / 14°F to 122°F
Storage Temperature:
-20°C to 60°C / -4°F to 140°F
Enclosure:
High impact ABS with rubber sides for easy grip
Front Panel:
Polycarbonate

Power Supply

Batteries:
2 x AA 1.5v Alkaline
2 x AA 1.2v Ni-MH Rechargeable
Battery Life:
100 hours with backlight off
Battery Indicator:
On all screens with a low level alarm
Auto-Off:
Programmable 1 to 120 minutes

Login to NOMO

NOMO Deals

Get the best offers in NDT products.