Measuring

Modes:
Eddy current
Range:
0 to 15mm / 0 to 5.905in
*Depending on probe and material
Resolution:
Up to 99.9µm, 0.1µm or up to 4.99Mil, 0.01Mil
Above 100µm, 1µm or above 5Mil, 0.1Mil
Precision:
±1 at 3% +2μm (+0.07Mil) *depending on probe
Measuring Velocity:
Aproximately 99 measurements per minute

Calibration

9 modes:
Base & 1 point
Base & 2 point
Muiltipoint
1 point
Base
ISO (ISO 19840)
SSPC (SSPC-PA2)
SWE (SS 184160)
AUS (AS 3894.3)
Set Number of Samples
User defined except for specific calibration modes
Memory
Save commonly used shim values

Features

Type of Base
Permanent indicator
Counter Configuration
Measure number of layers in a coating
Histogram Range
User defined high and low values
Measurement Modes
Continuous and Hold Last
Differential Mode:
Difference between actual measurement and reference value
Internal Clock:
Date and Time (Selectable format)

Statistics

Types:
Minimum, maximum, average, range, standard deviation, coefficient of variation
Error:
High, Low, High%, Low% based on high and low alarm settings

Calculations are based on stored values only

Model Upgrade Licenses

Purchase licenses to upgrade to a QC5 DLF, QC5 C or
QC5 DLC

For QC5 C and QC5 DLC models you need to purchase a combined probe as well

Alarms

Low & High:
User defined
Alarm Types:
Visible: flashing backlight or irregular digits
Audible: intermitent beep

Display

Digits:
17mm / 0.66in tall
Graphic LCD:
128×64 pixels
Viewable Area:
45 x 30mm / 1.77 x 1.18in
Backlight:
LED backlight (ON, OFF, Auto)
Contrast:
Digital 30 steps

User Interface

Languages:
English, Spanish and Portuguese
Menu Screens:
Icon based
User ID:
Personal information with password protection

Probe

Type:
Ferrous
Probe Range:
Ferrous, 0 to 1500µm or 0.025 to 19.999in
Resolution:
Up to 99.9µm, 0.1µm or up to 4.99Mil, 0.01Mil
Above 100µm, 1µm or above 5Mil, 0.1Mil
Material Base:
Ferrous: Iron, Steel, Magnetic Stainless Steel
Minimum Base Thickness:
Ferrous: 0.1mm or 0.003in
Minimum Convex Radius:
Ferrous: 2mm or 0.07in
Minimum Concave Radius:
Ferrous: 25mm or 0.98in
Minimum Sample Diameter:
5mm or 0.19in

Units

Metric:
Microns (µm)
Millimeters (mm)
Imperial:
Inches (Mil)

Data Logger

Storage:
Up to 32000 readings
Data Transfer:
NOT AVAILABLE
Organization:
8 files with 10 character alphanumeric naming
Capture Modes:
Manual: Touch the “Store” key to store values
Single: Automatic each time the probe is coupled
Continuous: Automatic while the proble is coupled
Date and Time Register:
Register day and time

Connect to PC

Connectivity:
USB (cable included) or RS232 (optional cable)

Front Panel

Touch-Sense Keypad:
No mechanical parts
Keypad:
Sensitivity adjustment
Auto pressure detection
Auto scrolling detection

Electronic Unit

Dimensions:
H: 117mm / 4.60in
L: 78.74mm / 3.10in
W: 24mm / 0.94in
Weight:
200g / 7.05oz with batteries
Working Temperature:
-10°C to 50°C / 14°F to 122°F
Storage Temperature:
-20°C to 60°C / -4°F to 140°F
Enclosure:
High impact ABS with rubber sides for easy grip
Front Panel:
Polycarbonate

Power Supply

Batteries:
2 x AA 1.5v Alkaline
2 x AA 1.2v Ni-MH Rechargeable
Battery Life:
100 hours with backlight off
Battery Indicator:
On all screens with a low level alarm
Auto-Off:
Programmable 1 to 120 minutes

Warranty

Electronic Unit:
5 year limited
Probes:
6 months