DMQ QC5 C Advanced Coating Thickness Gauge
Non-Ferrous Base + Data Logger
Have questions about buying this product?
Use a QC5 C coating thickness gauge to obtain precise and repetitive thickness measurements of dry coatings and platings applied over Ferrous and Non-Ferrous substrates. The DMQ combined probe recognizes the type of base automatically so that you can concentrate on measuring.
Other QC5 features include 9 calibration modes, calibration memories, a continuos measurement mode and much more.
Measuring
- Ferrous / Non-Ferrous Base
- Eddy Current – Magnetic Induction
- Range:
0 – 1500µm
0 – 60Mils - Resolution:
1µm
0.1Mil
Calibration
- 9 calibration modes
- Complies with:
ISO (ISO 19840)
SSPC (SSPC-PA2)
SWE (SS 184160)
AUS (AS 3894.3 - Calibration memory
Units
- Microns (µm)
- Millimeters (mm)
- Imperial (Mils)
Graphic LCD Display
- LCD 128×64 pixels
- LED backlight illumination
(ON, OFF, Auto) - Digits:
17mm / 0.66in tall - Adjustable digital contrast
Multi-Language
- English
- Spanish
- Portuguese
Features
- Type of base indicator
- Coupling indicator
- Continuos measurement mode
- Differential mode
- Count the number of layers in a coating
- Graphics
- Statistics
Data Logger
- 32000 readings that can be viewed on the unit screen
Model Upgrade Licenses
- Upgrade to a QC5 DLC with the purchase of a model upgrade license
Connections
- Type Lemo “0B” connector for probe
- The USB port can be used if upgrading to a QC5 DLC
Alarms
- Low & High, user defined
- Alarm types
Visible: Flashing backlight and irregular digits
Audible: Intermitent beep
Warranty
- 5 year limited on electronics
- 6 months on accessories
Front Panel
- Touch-Sense with sensitivity adjustment
- No mechanical parts
- Auto pressure recognition
- Auto scrolling recognition
Power Supply
- 2 x AA 1.5v Alkaline
- 2 x AA 1.2v Ni-MH Rechargeable
- Easy slide battery compartment cover
Dimensions
- H: 117mm / 4.60in
- L: 78.74mm / 3.10in
- W: 24mm / 0.94in
DMQ QC5 C standard configuration | |||
• | DMQ QC5 C electronic unit | ||
• | DMQ straight Combined probe | ||
• | Ferrous base | ||
• | Non-Ferrous base | ||
• | 3 shims for calibration | ||
• | Printed user manual | ||
• | High impact carrying case | ||
• | Certificate of conformity |
Measuring
Modes:
Magnetic induction / Eddy current
Range:
0 to 15mm / 0 to 5.905in
*Depending on probe and material
Resolution:
Up to 99.9µm, 0.1µm or up to 4.99Mil, 0.01Mil
Above 100µm, 1µm or above 5Mil, 0.1Mil
Precision:
±1 at 3% +2μm (+0.07Mil) *depending on probe
Measuring Velocity:
Approximately 99 measurements per minute
Calibration
9 modes:
Base & 1 point
Base & 2 point
Muiltipoint
1 point
Base
ISO (ISO 19840)
SSPC (SSPC-PA2)
SWE (SS 184160)
AUS (AS 3894.3)
Set Number of Samples
User defined except for specific calibration modes
Memory
Save commonly used shim values
Features
Type of Base
Permanent indicator
Counter Configuration
Measure number of layers in a coating
Histogram Range
User defined high and low values
Measurement Modes
Continuous and Hold Last
Differential Mode:
Difference between actual measurement and reference value
Internal Clock:
Date and Time (Selectable format)
Statistics
Types:
Minimum, maximum, average, range, standard deviation, coefficient of variation
Error:
High, Low, High%, Low% based on high and low alarm settings
Calculations are based on stored values only
Model Upgrade Licenses
Purchase a license to upgrade to a QC5 DLC
Alarms
Low & High:
User defined
Alarm Types:
Visible: flashing backlight or irregular digits
Audible: intermitent beep
Display
Digits:
17mm / 0.66in tall
Graphic LCD:
128×64 pixels
Viewable Area:
45 x 30mm / 1.77 x 1.18in
Backlight:
LED backlight (ON, OFF, Auto)
Contrast:
Digital 30 steps
User Interface
Languages:
English, Spanish and Portuguese
Menu Screens:
Icon based
User ID:
Personal information with password protection
Probe
Type:
Combined (Ferrous / Non-Ferrous)
Probe Range:
Ferrous / Non-Ferrous, 0 to 1500µm or 0.025 to 19.999in
Resolution:
Up to 99.9µm, 0.1µm or up to 4.99Mil, 0.01Mil
Above 100µm, 1µm or above 5Mil, 0.1Mil
Material Base:
Ferrous: Iron, Steel, Magnetic Stainless Steel
Non-Ferrous: Aluminum, Copper, Bronze, etc.
Minimum Base Thickness:
Ferrous: 0.1mm or 0.003in
Non-Ferrous: 0.3mm or 0.01in
Minimum Convex Radius:
Ferrous: 2mm or 0.07in
Non-Ferrous: 5mm or 0.19in
Minimum Concave Radius:
Ferrous / Non-Ferrous: 25mm or 0.98in
Minimum Sample Diameter:
5mm or 0.19in
Units
Metric:
Microns (µm)
Millimeters (mm)
Imperial:
Inches (Mil)
Data Logger
Storage:
Up to 32000 readings
Data Transfer:
NOT AVAILABLE
Organization:
8 files with 10 character alphanumeric naming
Capture Modes:
Manual: Touch the “Store” key to store values
Single: Automatic each time the probe is coupled
Continuous: Automatic while the proble is coupled
Date and Time Register:
Register day and time
Connect to PC
Connectivity:
USB (cable included) or RS232 (optional cable)
Front Panel
Touch-Sense Keypad:
No mechanical parts
Keypad:
Sensitivity adjustment
Auto pressure detection
Auto scrolling detection
Electronic Unit
Dimensions:
H: 117mm / 4.60in
L: 78.74mm / 3.10in
W: 24mm / 0.94in
Weight:
200g / 7.05oz with batteries
Working Temperature:
-10°C to 50°C / 14°F to 122°F
Storage Temperature:
-20°C to 60°C / -4°F to 140°F
Enclosure:
High impact ABS with rubber sides for easy grip
Front Panel:
Polycarbonate
Power Supply
Batteries:
2 x AA 1.5v Alkaline
2 x AA 1.2v Ni-MH Rechargeable
Battery Life:
100 hours with backlight off
Battery Indicator:
On all screens with a low level alarm
Auto-Off:
Programmable 1 to 120 minutes
Warranty
Electronic Unit:
5 year limited
Accessories:
6 months