DMQ QC5 C Coating Thickness Gauge

Only by Request

Non-Ferrous Base + Data Logger

Use a QC5 C coating thickness gauge to obtain precise and repetitive thickness measurements of dry coatings and platings applied over Ferrous and Non-Ferrous substrates. The DMQ combined probe recognizes the type of base automatically so that you can concentrate on measuring.

Other QC5 features include 9 calibration modes, calibration memories, a continuos measurement mode and much more.

Measuring

  • Ferrous / Non-Ferrous Base
  • Eddy Current – Magnetic Induction
  • Range:
    0 – 1500µm
    0 – 60Mils
  • Resolution:
    1µm
    0.1Mil

 

Calibration

  • 9 calibration modes
  • Complies with:
    ISO (ISO 19840)
    SSPC (SSPC-PA2)
    SWE (SS 184160)
    AUS (AS 3894.3
  • Calibration memory

 

Units

  • Microns (µm)
  • Millimeters (mm)
  • Imperial (Mils)

Graphic LCD Display

  • LCD 128×64 pixels
  • LED backlight illumination
    (ON, OFF, Auto)
  • Digits:
    17mm / 0.66in tall
  • Adjustable digital contrast

QC5 F

Multi-Language

  • English
  • Spanish
  • Portuguese

Features

  • Type of base indicator
  • Coupling indicator
  • Continuos measurement mode
  • Differential mode
  • Count the number of layers in a coating
  • Graphics
  • Statistics

Data Logger

  • 32000 readings that can be viewed on the unit screen

Model Upgrade Licenses

  • Upgrade to a QC5 DLC with the purchase of a model upgrade license

Connections

  • Type Lemo “0B” connector for probe
  • The USB port can be used if upgrading to a QC5 DLC

Alarms

  • Low & High, user defined
  • Alarm types
    Visible: Flashing backlight and irregular digits
    Audible: Intermitent beep

Warranty

  • 5 year limited on electronics
  • 6 months on accessories

Front Panel

  • Touch-Sense with sensitivity adjustment
  • No mechanical parts
  • Auto pressure recognition
  • Auto scrolling recognition

Power Supply

  • 2 x AA 1.5v Alkaline
  • 2 x AA 1.2v Ni-MH Rechargeable
  • Easy slide battery compartment cover

Dimensions

  • H: 117mm / 4.60in
  • L: 78.74mm / 3.10in
  • W: 24mm / 0.94in

 

DMQ QC5 C standard configuration

DMQ QC5 C electronic unit
DMQ straight Combined probe
Ferrous base
Non-Ferrous base
3 shims for calibration
Printed user manual
High impact carrying case
Certificate of conformity

Measuring

Modes:
Magnetic induction / Eddy current
Range:

0 to 15mm / 0 to 5.905in
*Depending on probe and material
Resolution:
Up to 99.9µm, 0.1µm or up to 4.99Mil, 0.01Mil
Above 100µm, 1µm or above 5Mil, 0.1Mil
Precision:
±1 at 3% +2μm (+0.07Mil) *depending on probe
Measuring Velocity:
Approximately 99 measurements per minute

Calibration

9 modes:
Base & 1 point
Base & 2 point
Muiltipoint
1 point
Base
ISO (ISO 19840)
SSPC (SSPC-PA2)
SWE (SS 184160)
AUS (AS 3894.3)
Set Number of Samples
User defined except for specific calibration modes
Memory
Save commonly used shim values

Features

Type of Base
Permanent indicator
Counter Configuration
Measure number of layers in a coating
Histogram Range
User defined high and low values
Measurement Modes
Continuous and Hold Last
Differential Mode:

Difference between actual measurement and reference value
Internal Clock:
Date and Time (Selectable format)

Statistics

Types:
Minimum, maximum, average, range, standard deviation, coefficient of variation
Error:
High, Low, High%, Low% based on high and low alarm settings

Calculations are based on stored values only

Model Upgrade Licenses

Purchase a license to upgrade to a QC5 DLC

Alarms

Low & High:
User defined
Alarm Types:
Visible: flashing backlight or irregular digits
Audible: intermitent beep

Display

Digits:
17mm / 0.66in tall
Graphic LCD:

128×64 pixels
Viewable Area:
45 x 30mm / 1.77 x 1.18in
Backlight:
LED backlight (ON, OFF, Auto)
Contrast:
Digital 30 steps

User Interface

Languages:
English, Spanish and Portuguese
Menu Screens:
Icon based
User ID:
Personal information with password protection

Probe

Type:
Combined (Ferrous / Non-Ferrous)
Probe Range:

Ferrous / Non-Ferrous, 0 to 1500µm or 0.025 to 19.999in
Resolution:
Up to 99.9µm, 0.1µm or up to 4.99Mil, 0.01Mil
Above 100µm, 1µm or above 5Mil, 0.1Mil
Material Base:
Ferrous: Iron, Steel, Magnetic Stainless Steel
Non-Ferrous: Aluminum, Copper, Bronze, etc.
Minimum Base Thickness:
Ferrous: 0.1mm or 0.003in
Non-Ferrous: 0.3mm or 0.01in
Minimum Convex Radius:
Ferrous: 2mm or 0.07in
Non-Ferrous: 5mm or 0.19in
Minimum Concave Radius:
Ferrous / Non-Ferrous: 25mm or 0.98in
Minimum Sample Diameter:
5mm or 0.19in

Units

Metric:
Microns (µm)
Millimeters (mm)
Imperial:
Inches (Mil)

Data Logger

Storage:
Up to 32000 readings
Data Transfer:
NOT AVAILABLE
Organization:
8 files with 10 character alphanumeric naming
Capture Modes:
Manual: Touch the “Store” key to store values
Single: Automatic each time the probe is coupled
Continuous: Automatic while the proble is coupled
Date and Time Register:
Register day and time

Connect to PC

Connectivity:
USB (cable included) or RS232 (optional cable)

Front Panel

Touch-Sense Keypad:
No mechanical parts
Keypad:
Sensitivity adjustment
Auto pressure detection
Auto scrolling detection

Electronic Unit

Dimensions:
H: 117mm / 4.60in
L: 78.74mm / 3.10in
W: 24mm / 0.94in
Weight:
200g / 7.05oz with batteries
Working Temperature:
-10°C to 50°C / 14°F to 122°F
Storage Temperature:
-20°C to 60°C / -4°F to 140°F
Enclosure:
High impact ABS with rubber sides for easy grip
Front Panel:
Polycarbonate

Power Supply

Batteries:
2 x AA 1.5v Alkaline
2 x AA 1.2v Ni-MH Rechargeable
Battery Life:
100 hours with backlight off
Battery Indicator:
On all screens with a low level alarm
Auto-Off:
Programmable 1 to 120 minutes

Warranty

Electronic Unit:
5 year limited
Accessories:
6 months

Login to NOMO

NOMO Deals

Get the best offers in NDT products.