Jireh ROTIX – 2 Probe Phased Array Scanner

The ROTIX is a manual chain scanner designed to provide encoded probe position of probes circumferentially around tubes and pipes. The ROTIX – 2 Probe Phased Array Scanner is completely configurable for both phased array and traditional UT (Ultrasonic Testing) with single or multiple probes.

Adjustable Chain

Our exclusive chain design grants the ability to scan pipe/tube diameters of 3.8 cm to 96.5 cm while using quick release, easy to use chain system.

Frame Bars

45 cm (17.7 in) and 20 cm (7.8 in) frame bars provide setup options for dual and single probe scanning.

Brake system

A brake is provided to lock the scanner in a required position.


The umbilical is modular and can be removed from the scanner. It can be used for one-axis and two-axis scans when used with optional accessories.

Removable handle

The ROTIX includes a removable cover which allows easy access to protected connections while also providing a means of cable management.

Built-in Encoder

An encoder is integrated into the body of the ROTIX cart. The encoder output is fully compatible with all standard instruments


All wheels are coated with urethane to reduce the effects of foreign debris obstructing the rolling of the scanner. Urethane also eliminates the sideways sliding of the scanner when used in vertical applications.

Probe Holders

An integrated latch allows easy probe center spacing adjustment and scanner installation. Due to its modular design, most major types of phased array wedges can be accommodated.


Three-year limited warranty on all products.

Component Identification


1 Cart

The ROTIX cart is paired with urethane wheels for smooth, unobstructed motion upon scan surfaces.

2 Frame Bar

45 cm (17.7 in) and 20 cm (7.9 in) frame bar lengths are included with this kit to facilitate various scanner configurations.

3 Slip Joint Probe Holders

Maintain constant contact between the inspection surface and the probe with low profile, spring-loaded probe holders.

4 Stabilizer Wheel

Maintain level and balance of the scanner with a magnetized stabilizer wheel.

5 Short Link

Various amounts of single wheel short links are included in each kit configuration.

6 Short Link with Dovetail

Utilize the short link with dovetail to mount accessories such as cable management to the chain system.

7 Catch Link

Works in conjunction with the buckle to mount the scanner to the pipe/tube.

8 Long Link

Equivalent to (approx.) 3 short links, the long link is used for larger diameter scans.

9 Buckle

The buckle connects to the catch link to complete the chain system. Adjust the buckle to control the chain’s tension around the pipe/tube exterior.


Pipe Range, Circumferential: 3.8 cm – 96.5 cm (1.5 in – 38 in)
Encoder Resolution: 19.1 counts/mm (485.1 counts/inch)
Probe Holding Capacity: 2 Phased Array Wedges
Umbilical Length: 5 m (16.4 ft)1
Inspection Surface: Ferrous and non-ferrous


Clearance: 10.2 cm (4 in)


Cart Height: 8.1 cm (3.2 in)
Cart Width: 8 cm (3.15 in)
Cart Length: 17.1 cm (6.8 in)2
Cart Weight: 0.77 kg (1.7 lb)3


Operating Environment: -20°C (-4°F) to 50°C (122°F)
Environmental Sealing: Dust-tight, watertight (not submersible)


Minimum Wedge Width: 17.1 mm (0.7 in)
Maximum Wedge Width: 57.6 mm (2.3 in)4

Probe Holder Pivot Buttons



Pivot Hole Size: 8.0 mm (0.315 in)
Wedge Type: Olympus PA
Hex Size: 9.53 mm (3/8 in)


Pivot Hole Size: 5.0 mm (0.197 in)
Wedge Type: Olympus TOFD, Olympus A27 DMA
Hex Size: 9.53 mm (3/8 in)


Pivot Hole Size: 2.7 mm (0.106 in)
Wedge Type: Sonatest DAAH PH
Hex Size: 9.53 mm (3/8 in)


Pivot Hole Size: 9.5 mm (0.375 in)
Hex Size: 11.1 mm (7/16 in)


Pivot Hole Size: 3.0 mm (0.118 in)
Hex Size: 9.53 mm (3/8 in)


Pivot Hole Size: 2.3 mm (0.09 in)
Hex Size: 9.53 mm (3/8 in)


Pivot Hole Size: Conical Head
Hex Size: 9.53 mm (3/8 in)


Pivot Hole Size: 5 mm (0.197 in)
Wedge Type: Internal Zetec PA/TOFD, Phoenix TOFD
Hex Size: 9.53 mm (3/8 in)


Pivot Hole Size: 5.6 mm (0.221 in)
Hex Size: 9.53 mm (3/8 in)

  1.  Custom umbilical lengths available.
  2. Length includes umbilical’s strain relief.
  3. Cart weight with umbilical housing but not including cabling.
  4. Some arms styles may provide additional maximum wedge width. Contact Jireh Industries for details.
    Technical specifications are subject to change.

Kit Contents

  • SCANNER Cart with built-in encoder and tail PARTS & ACCESSORIES Single wheel chain links (Long, short, buckle, etc) Stabilizer wheel Umbilical, 5 m (16.4 ft) cable length Slip joint phased array probe holder x2 45 cm (17.7 in) frame bar 20 cm (7.9 in) frame bar Long probe holder arm set x2 4 mm ID irrigation kit (7/16 in quick connect) Probe holder spare parts kit User manual Setup chart Rugged carrying case TOOLS 3 mm hex driver Wrench for pivot button adjustment *Kit contents may vary depending on the configuration selected.
Login to NOMO

NOMO Deals

Get the best offers in NDT products.