Straight Shaft Probe for sub surface flaw 001

OKOndt Straight Shaft Probe for sub-surface flaws detection

Only by Request

Part # NMSSPFS-SURF Categories , Tag
Downloads

Straight Shaft Probe for sub-surface flaws detection in the second layer, through the first layer with up to 1.5 mm thickness (e.g., testing of load-bearing elements under aircraft skin) (Reflection type)

Designation Outer diameter, mm/inch Length, mm/inch Frequency Connector Material Detected flaws
SSP3K11DASh 11/.43 39/1.5 1-25 kHz Lemo 04 NFe in aluminum through skin with up to 1.5 mm thickness
in titanium at 5 mm depth
SSP25K7DA 7/.28 50/2 12-40 kHz Lemo 04 NFe in aluminum through skin with up to 1.5 mm thickness
SSP25K10DA1 10/.39 50/2 12-40 kHz Lemo 04 NFe in aluminum through skin with up to 1.5 mm thickness
SSP25K10DA0 10/.39 50/2 12-40 kHz Triax Lemo / Fischer NFe in aluminum through skin with up to 1.5 mm thickness

 

SSP 3K 11D A (Sh)
1 2 3 4 5

  1. SSP – sub-surface probe for subsurface flaws detection.
  2. Probe frequency:

HZ” designates the Hz range; “К” designates the kHz range; “М” designates the MHz range.

  1. Probe tip diameter, mm.
  2. Probe type designation: “А”. АAbsolute.
  3. Sh – Shielded sensing element. Absence of such designation mark means that the sensing element is made unshielded.
Login to NOMO

NOMO Deals

Get the best offers in NDT products.