PH Tool Cal Block No. 2 (K2)
Have questions about buying this product?
12.5mm thick small calibration block for on-site checking of miniature shear wave probe index, time base, beam angle and gain. Includes a 25mm and 50 mm radius, 5.0mm hole, engraved reference mark scales from 35 to 75 degrees.
| Material | 1018 Steel, Special Alloy, Type 304 Stainless Steel |
|---|---|
| Thick | 12.5mm, 25mm |
| Include Case | None, Wood Case |
| Include Dimensional Report | No, Yes |
Calibration Block No. 2, 12.5mm, 1018 Steel
12.5mm thick small calibration block for on-site checking of miniature shear wave probe index, time base, beam angle and gain.
Includes a 25mm and 50 mm radius, 5.0mm hole, engraved reference mark scales from 35 to 75 degrees. In accordance with EN 27963, DIN 54-120, and ISO 7963.
- Dimensions: 75mm x 43mm x 12.5mm
- Made from 1018 Steel, Nickel-plated.
- Also available in 25mm thickness for calibration of non-miniature probes.
- Fitted wooden storage case optional
Calibration Block No. 2, 25mm, 1018 Steel
25mm thick small calibration block for on-site checking of miniature shear wave probe index, time base, beam angle and gain.
Includes a 25mm and 50 mm radius, 5.0mm hole, engraved reference mark scales from 35 to 75 degrees. In accordance with EN 27963, DIN 54-120, and ISO 7963.
- Dimensions: 75mm x 43mm x 25.0mm
- Made from 1018 Steel, Nickel-plated.
- Also available in 12.5mm thickness.
- Fitted wooden storage case optional.
Calibration Block No. 2, 25mm, Special Alloy
25.0mm thick small calibration block for on-site checking of miniature shear wave probe index, time base, beam angle and gain.
Includes a 25mm and 50 mm radius, 5.0mm hole, engraved reference mark scales from 35 to 75 degrees. In accordance with EN 27963, DIN 54-120, and ISO 7963.
- Dimensions: 75mm x 43mm x 25.0mm
- Also available in 12.5mm thickness.
- Fitted wooden storage case optional
Calibration Block No. 2, 12.5mm, Type 304 Stainless Steel
12.5mm thick small calibration block for on-site checking of miniature shear wave probe index, time base, beam angle and gain.
Includes a 25mm and 50 mm radius, 5.0mm hole, engraved reference mark scales from 35 to 75 degrees. In accordance with EN 27963, DIN 54-120, and ISO 7963.
- Dimensions: 75mm x 43mm x 12.5mm
- Made from Type 304 Stainless Steel
- Also available in 25mm thickness for calibration of non-miniature probes.
- Fitted wooden storage case optional
Calibration Block No. 2, 25mm, Type 304 Stainless Steel
25mm thick small calibration block for on-site checking of miniature shear wave probe index, time base, beam angle and gain.
Includes a 25mm and 50 mm radius, 5.0mm hole, engraved reference mark scales from 35 to 75 degrees. In accordance with EN 27963, DIN 54-120, and ISO 7963.
- Dimensions: 75mm x 43mm x 25.0mm
- Type 304 Stainless Steel
- Also available in 12.5mm thickness.
- Fitted wooden storage case optiona
