PH Tool PACS® Block – 3/64″ (1.2mm) Holes
Have questions about buying this product?
Phased Array Calibration Standard (PACS™) used for angle beam verification, probe angle exit point, calibration for wedge delay, sensitivity, DAC/TCG for thicknesses up to 2″. Inch The three radii (0.500, 1.000, 2.000″) allow for exit point…
Available In: Inch, Metric
| Material | 1018 Steel, 7075-T6 Aluminum, Special Alloy, Type 304 Stainless Steel |
|---|---|
| Measurement Unit | Inch, Metric |
| Include Case | None, Wood Case |
| Include Dimensional Report | No, Yes |
Phased Array Calibration Standard (PACS™) used for angle beam verification, probe angle exit point, calibration for wedge delay, sensitivity, DAC/TCG for thicknesses up to 2″.
Inch
The three radii (0.500, 1.000, 2.000″) allow for exit point verification, velocity, and sound path calculations. Block contains five holes at 3/64″ diameter drilled through the 1.000″ width, located at 0.100, 0.200, 0.400, 0.600, 0.800, 1.200, 1.400, 1.600, 1.800, and 1.900″ from the respective scanning surface. Generous hole spacing eliminated “ghost” images from adjacent holes. Also includes an engraved scale from 30° to 70° associated with the 0.800″ hole for beam angle verification.
Dimensions: 18.0″ x 2.0″ x 1.0″
Alloy: 1018 Steel, Nickel-plated
In accordance with PH Tool Drawing No. 10173. Designed jointly by PH Tool LLC and Davis NDE.
Metric
The three radii (12.5, 25, 50mm) allow for exit point verification, velocity, and sound path calculations. Block contains five holes at 1.2mm diameter drilled through the 25mm width, located at 2.5, 5.0, 10.0, 15.0, 20.0, 30.0, 35.0, 45.0, and 47.5mm from the respective scanning surface. Generous hole spacing eliminated “ghost” images from adjacent holes. Also includes an engraved scale from 30° to 70° associated with the 20mm hole for beam angle verification.
Dimensions: 450mm x 50mm x 25mm
Alloy: 1018 Steel, Nickel-Plated
In accordance with PH Tool Drawing No. 10213. Designed jointly by PH Tool LLC and Davis NDE.
Davis NDE, Inc and the University of Ultrasonics, in partnership with PH Tool, developed this universal calibration block for use in Phased Array Calibrations and Examinations. Phased Array training for use with the PACS™ block is available by contacting the University of Ultrasonics.
