


NM01ADP53/8KIT
Choose Quantity
SIUI Quick Change Ultrasonic Transducer Kit
5 MHz | 3/8" | Microdot Connector | 45°, 60° & 70° Replaceable Wedges
A compact quick-change angle-beam ultrasonic transducer kit from SIUI featuring a 5 MHz, 3/8" probe with Microdot connection and interchangeable 45°, 60° and 70° wedges for conventional UT weld inspection and flaw detection.

SIUI ultrasonic probe family shown for reference. Exact kit configuration is specified below.
| 5 MHz Frequency | 3/8" Crystal size | Microdot Connector | 3 Wedges 45° / 60° / 70° |
Overview
The SIUI Quick Change 5 MHz Ultrasonic Transducer Kit combines a compact 3/8" angle-beam probe with three interchangeable wedges for professional conventional ultrasonic inspection.
SIUI's replaceable-wedge probe family is designed to allow the inspection angle to be changed without replacing the complete probe assembly. This kit includes 45°, 60° and 70° wedges, providing three commonly used sound paths for weld inspection and general flaw-detection applications.
Operating at 5 MHz, the transducer provides a practical combination of sensitivity and resolution for detecting discontinuities in many common industrial components and welded structures.
The 3/8" crystal size offers a compact inspection footprint, while the Microdot connector provides a small, secure detachable interface for compatible ultrasonic probe cables.
Kit Configuration
Transducer: 5 MHz Quick Change Angle Probe
Crystal Size: 3/8" (approximately 9.5 mm)
Connector: Microdot
Included Wedges: 45°, 60° and 70°
Manufacturer: SIUI
Key Features
| Operating Frequency 5 MHz | High-resolution conventional UTThe 5 MHz frequency provides a useful balance between ultrasonic penetration and resolution for general weld inspection and flaw detection. |
Quick-change wedge designThe replaceable-wedge configuration allows inspectors to change beam angle while retaining the same transducer, simplifying multi-angle inspection setups. | Wedge Angles 45° / 60° / 70° |
| Crystal Size 3/8" Approx. 9.5 mm | Compact inspection footprintThe compact 3/8" crystal size allows the probe to be positioned on relatively small inspection surfaces and helps improve access around weld geometries and confined inspection areas. |
Compact Microdot connectionSIUI offers Microdot as a supported connector option for its replaceable-wedge ultrasonic probe family, providing a compact detachable probe connection. | Connector Microdot |
| SIUI ADP Family Replaceable Wedge | Designed for general-purpose angle-beam inspectionSIUI describes its mid-frequency ADP series as a general-purpose design combining medium pulse, medium damping and a typical -6 dB bandwidth of approximately 30% to 50%. |
Built for Professional Ultrasonic Inspection
Weld inspection
Angle-beam inspection directs ultrasonic energy through the component at an angle, helping detect discontinuities whose orientation may make them difficult to detect with a straight-beam transducer.
Three beam-angle options
Included 45°, 60° and 70° wedges provide multiple beam paths for adapting the inspection to component geometry, thickness and expected flaw orientation.
Reduced probe inventory
A single quick-change transducer can be paired with several wedges, reducing the need to carry a complete probe assembly for every inspection angle.
Replaceable wear component
Because the wedge is replaceable, a worn or damaged contact surface can be replaced separately from the ultrasonic transducer.
Specifications
| General | |
| Manufacturer | SIUI – Shantou Institute of Ultrasonic Instruments Co., Ltd. |
|---|---|
| Product Type | Quick-change angle-beam ultrasonic transducer kit |
| SIUI Probe Family | ADP replaceable-wedge family |
| Inspection Method | Conventional Ultrasonic Testing (UT) |
| Transducer | |
| Frequency | 5 MHz |
| Crystal Size | 3/8" (approximately 9.5 mm) |
| Connector | Microdot |
| Probe Design | Replaceable / quick-change wedge |
| Typical -6 dB Bandwidth | Approximately 30%–50% for SIUI mid-frequency ADP series |
| Wedges | |
| Included Angles | 45°, 60° and 70° |
| Wedge Type | Replaceable / interchangeable |
| SIUI Wedge Family for Approx. Φ10 Probe | AD-10-45 / AD-10-60 / AD-10-70 |
| Physical | |
| Comparable Φ10 SIUI Housing Diameter | Approx. 17 mm maximum diameter |
| Comparable Φ10 SIUI Housing Height | Approx. 23 mm |
| Product Weight | Not published for this exact kit configuration |
| Shipping | |
| Packed Box Dimensions (Estimated) | 8 × 6 × 4 in (203 × 152 × 102 mm) |
| Gross Shipping Weight (Estimated) | Approx. 1.5 lb (0.68 kg), including transducer, three wedges and protective packaging |
What's Included
| Quick Change Transducer | 5 MHz, 3/8", Microdot |
| 45° Wedge | Replaceable angle-beam wedge |
| 60° Wedge | Replaceable angle-beam wedge |
| 70° Wedge | Replaceable angle-beam wedge |
Probe cable, ultrasonic flaw detector, couplant and calibration blocks are not listed as included unless specified separately with the order.
Applications
| ✓ Weld inspection | ✓ Structural steel inspection |
| ✓ Pipeline weld inspection | ✓ Pressure-vessel weld inspection |
| ✓ Crack detection | ✓ Lack-of-fusion evaluation |
| ✓ Fabrication QA/QC | ✓ General angle-beam UT |
| ✓ Maintenance inspection | ✓ Field ultrasonic testing |
Downloads
SIUI Ultrasonic Probes Catalog
About SIUI
Shantou Institute of Ultrasonic Instruments Co., Ltd. (SIUI) develops and manufactures ultrasonic inspection equipment and accessories for non-destructive testing. Its NDT portfolio includes ultrasonic flaw detectors, thickness gauges, phased-array systems, TOFD systems, conventional ultrasonic probes, wedges, cables, calibration blocks and custom inspection solutions.
Manufactured by



