NM01605026U
Out of stock
Tags:
** USED ** FERITSCOPE FMP30C Measurement of the Ferrite Content, Fischer Includes: Calibration certificate, FGAB1.3-Fe probe, set of 5 standards*, USB cable, Fischer Data Center Software, batteries, wrist strap (lanyard), carrying case and manual (on CD).
$5,650.00
Product Details
The FERITSCOPE FMP30 measures the ferrite content in austenitic and duplex steel according to the mag‑ netic induction method. All magnetisable structure sections are measured i. e., in addition to delta ferrite also straininduced martensite, for example, or other ferritic phases.
It is suited for measurements according to the Basler Standard and according to DIN EN ISO 17655. Areas of application are onsite measurements, e.g. of auste‑ nitic platings as well as weld seams in stainless steel pipes, containers, boilers or other products made of austenitic or duplex steel.
Duplex steel is used increasingly in the chemical and petrochemical industries, e.g., for boilers and pipelines. A ferrite deficit in the weld seam area leads to strength reduction, an excess ferrite content to a reduction in toughness and ductility.
In particular when welding duplex steel, the ferrite content in the welding area can easily assume unfa‑ vourable values either due to unsuitable welding filler materials or through poor heat input or heat removal. Only an onsite measurement can provide the assur ance that the processing did not change the opti mum ferrite content in an unfavourable manner at the expense of mechanical or corrosionresistance proper‑ ties.
Brochure: 