NM01B310PDC
Out of stock
Tags:
MAGNETIC YOKE B310PDC, 12VDC, PARKER
$562.00
Product Details
The B310PDC (Pulsed D.C.) Contour Probe is a very portable, battery operated Magnetic Inspection Yoke designed for Magnetic Particle inspection. It is especially convenient for use where outside power is unavailable or where operator safety is a concern.
INSTRUMENT DESCRIPTION: The B310PDC Contour Probe is an electromagnet that produces a strong Pulsed D.C. magnetic field. A circuit board contained within the Probe assembly produces a high frequency Pulsed D.C. field. All Parker Contour Probes are designed with flexible legs that allow the field to be "focused" at a precise area of inspection. The maximum leg spacing is 9 inches (228.6 mm). The 310PDC series Contour Probe comes equipped with a 6’ (1.82 m) power cord. Although this Pulsed field produces more defined defect indications over that of a pure D.C. field, the Pulsed D.C. field may not in all instances produce the same sensitivity to detect minute defect indications that might otherwise be obtained by an A.C. field. Further, the Pulsed D.C. field does not capture the magnetic field width of the surface test area that is obtained with A.C. Care should be taken to test for defects in a line between the poles (legs) upon the work surface.
BATTERY PACK: The B310PDC operates from a 12VDC battery. Parker Battery Packs: P/N: BP-7 (7.2 Amp Hour) and P/N: BP-15 (14.4 Amp Hour).
Brochure: 