
NM01MFADY230
Choose Quantity
Magnafield MF-ADY AC/HWDC Magnetic Yoke
230 V AC Configuration | Model: MF-ADY
A lightweight dual-mode magnetic particle inspection yoke combining AC magnetization for surface discontinuity detection with Half-Wave DC (HWDC) for deeper and subsurface indications.

| 4.5 kg AC lifting capacity | 22.5 kg HWDC lifting capacity | <3 kg Yoke weight | 300 mm 12" max. pole spacing |
The Magnafield MF-ADY is a portable electromagnetic yoke designed for magnetic particle inspection of ferromagnetic components. It provides both AC and Half-Wave DC (HWDC) magnetization modes in a single handheld instrument.
AC magnetization is particularly effective for detecting surface-breaking discontinuities, while HWDC provides greater field penetration for detecting near-surface and subsurface discontinuities.
The articulated pole legs can be positioned to accommodate curved, irregular and flat components, with an adjustable interpole distance of up to 300 mm (12").
Weighing less than 3 kg (6.6 lb), the MF-ADY is designed for portable field inspection while still providing lifting capacity of approximately 4.5 kg in AC mode and 22.5 kg in HWDC mode.
Electrical Configuration
This listing is for the 230 V AC configuration. Magnafield's current published MF-ADY literature identifies the current-input specification as 220 V single-phase. Confirm the exact voltage configuration before ordering or connecting the yoke.
Key Features
![]() | AC and HWDC in one yokeSwitch between AC magnetization for surface discontinuities and HWDC for deeper field penetration, allowing one portable instrument to support a wider range of inspection requirements. |
Articulated pole legsAdjustable articulated legs help the yoke conform to welds, pipes, castings, forgings and irregular component geometries. Pole spacing can be adjusted up to 300 mm (12"). | Adjustable Interpole Distance Up to 12" 300 mm maximum |
| HWDC Lift 22.5 kg Approx. 49.6 lb | Strong magnetic field performanceManufacturer specifications list approximately 4.5 kg (9.9 lb) lifting capacity in AC mode and 22.5 kg (49.6 lb) in HWDC mode. |
See It in Action
Built for Professional NDT
Surface and subsurface inspection
Dual AC/HWDC capability allows inspectors to select the magnetization mode according to the expected discontinuity depth.
Lightweight portable construction
At less than 3 kg (6.6 lb), the MF-ADY is designed for portable magnetic particle inspection in fabrication shops, maintenance facilities and field environments.
Rugged housing
Magnafield uses a strong industrial housing designed for routine inspection work and repeated handling in NDT environments.
Reduced sparking and hot-spot risk
Magnafield specifically describes the MF-ADY as designed to operate without the sparking or localized hot spots associated with some contact-based magnetization methods.
Calibration support
Magnafield states that NABL-traceable test and calibration certificates are available for its MPI yokes.
Specifications
| General | |
| Manufacturer | Magnafield Electronics & Engineering |
|---|---|
| Model | MF-ADY |
| Product Type | Portable electromagnetic MPI yoke |
| Magnetization Modes | AC and Half-Wave DC (HWDC) |
| Listed Configuration | 230 V AC |
| Manufacturer Current Literature | 220 V single-phase, 2 A |
| Yoke Weight | Less than 3 kg (6.6 lb) |
| Product Dimensions | Not published by manufacturer |
| Box Dimensions (Estimated) | 356 × 305 × 152 mm (14 × 12 × 6 in) |
| Shipping Weight (Estimated) | Approx. 3.6 kg (8.0 lb) |
| Magnetic Performance | |
| AC Lifting Capacity | 4.5 kg (9.9 lb) |
| HWDC Lifting Capacity | 22.5 kg (49.6 lb) |
| AC Inspection | Primarily surface discontinuities |
| HWDC Inspection | Surface and near-surface / subsurface indications |
| Mechanical | |
| Pole Legs | Articulated |
| Maximum Interpole Distance | 300 mm (12") |
| Housing | Rugged portable housing |
| Operating Information | |
| Duty Cycle | Manufacturer publications vary: brochure states 2 minutes; current online specification table states 1 minute ON/OFF |
| Calibration Documentation | NABL-traceable test and calibration certificates available |
What's in the Box
![]() |
Exact supplied accessories and calibration documentation may vary by order. Confirm the required 230 V configuration before purchase. |
Applications
The MF-ADY is designed for portable magnetic particle inspection of ferromagnetic components requiring surface and near-surface discontinuity detection.
| ✓ Weld inspection | ✓ Structural steel inspection |
| ✓ Pipeline inspection | ✓ Castings and forgings |
| ✓ Pressure-vessel components | ✓ Fabrication inspection |
| ✓ Maintenance and repair inspection | ✓ Field magnetic particle testing |
| ✓ Surface discontinuity detection | ✓ Near-surface / subsurface indication detection |
Downloads
⬇ Magnafield MPI Yokes Manufacturer Brochure
About Magnafield
Magnafield Electronics & Engineering develops and manufactures equipment and accessories for non-destructive testing, including magnetic particle inspection yokes, MPI machines, UV inspection lighting, radiographic testing equipment and related inspection accessories.
Manufactured by




