NM01X3A001

Sonatest X3A-2.25M48E-0.8x10-SQX2.5 Phased Array Probe - Long Array for Advanced Electronic Scanning

Unlock superior inspection capabilities for challenging materials and thicker sections with this high-performance Sonatest X3A-2.25M48E-0.8x10-SQX2.5 Phased Array Probe. As part of the advanced X3 Series, this "Long Array" probe is meticulously engineered with a powerful 2.25 MHz frequency and 48 elements, offering exceptional beam control, deep penetration, and wide electronic scanning coverage for critical Non-Destructive Testing (NDT) applications.

Key Features & Benefits:

• Robust 2.25 MHz Frequency: Ideal for inspecting thicker materials, attenuative materials (like coarse-grained structures, composites), and materials with high signal scattering. This frequency ensures excellent penetration while still providing good resolution for flaw detection.

• High Element Count (48 Elements): The extensive 48-element array provides unparalleled control over the ultrasonic beam. This enables:

  • Advanced Beam Steering: Precisely direct the sound beam at various angles to optimize flaw detection regardless of orientation.

  • Superior Beam Focusing: Concentrate acoustic energy at specific depths for enhanced sensitivity and accurate flaw sizing.

  • Wide Electronic Scan Coverage: Quickly cover large areas with high resolution, improving inspection efficiency and reducing scan time.

• Optimal Element Pitch & Elevation:

  • 0.8 mm Element Pitch: Balances broad angular steering capabilities with excellent resolution, ensuring detailed imaging.

  • 10 mm Elevation: Provides a large acoustic aperture in the non-scanning direction, contributing to strong signal-to-noise ratio and consistent beam characteristics.

• Long Array Design: With 48 elements at 0.8 mm pitch, this probe boasts an active aperture of 38.4 mm (approx. 1.5 inches), which delivers:

  • Improved beam shape and reduced divergence for more reliable inspections.

  • Extended scan coverage with each pass, enhancing productivity.

• Integrated 2.5 Meter SQX Cable: Comes with a durable, integrated 2.5-meter (approximately 8.2 ft) cable, providing ample reach and flexibility for various inspection setups. The Sonatest SQX (Square I-PEX) connector ensures a robust, quick, and reliable connection to Sonatest VEO/Prisma phased array instruments.

• Sonatest X3 Series Quality: As a product within Sonatest's high-end X3 series, this probe guarantees superior performance, reliability, and precision, essential for demanding industrial environments and complex inspection challenges.

Specifications:

• Series: Sonatest X3 Series

• Probe Type: Long Array Phased Array Probe

• Model: X3A-2.25M48E-0.8x10-SQX2.5

• Frequency: 2.25 MHz

• Number of Elements: 48

• Element Pitch (P): 0.8 mm

• Element Elevation (E): 10 mm

• Total Active Aperture (L): 38.4 mm (48 elements x 0.8 mm pitch)

• Cable Length: 2.5 meters (8.2 ft)

• Connector Type: Sonatest Quick I-PEX (SQX)

External Probe Dimensions (Approximate - Head Only):

• Length: Approx. 45 - 55 mm (1.77 - 2.17 inches)

• Width: Approx. 15 - 20 mm (0.59 - 0.79 inches)

• Height: Approx. 20 - 25 mm (0.79 - 0.98 inches)

Ideal For:

• Inspection of thick-section welds (e.g., in pressure vessels, heavy fabrication).

• Testing of attenuative or coarse-grained materials (e.g., certain stainless steels, castings).

• Corrosion mapping where deeper penetration is required.

• Automotive, Aerospace, Power Generation, Oil & Gas, and Marine NDT applications.