Labino Inspector Kit for NDT

The ultimate inspector kit (PN: K001) to carry field inspections is a professional and reliable manner

Part # NMK001 Category

Have questions about buying this product?

Chat with a Nomo Specialist

The ultimate inspector kit (PN: K001) to carry field inspections is a professional and reliable manner. All UV lights included are tested and certified to comply with ASTM E3022-18.

Standard kit (PN: K001) includes 3 highly durable UV lights and 1 UV and White Light meter:

(a) MB 3.0 Zeus handheld UV light with Athena spray can holder – PN: L122;

(b) UVG3 2.0 Midlight UV Flashlight – PN: L135;

(c) UVG5 2.0 Midlight UV Headlight – PN: L128;

(d) Apollo 2.0 UV and White Light meter – PN: M505.

Type

Inspector Kit, USAF Inspector Kit

The standard Inspector kit (PN: K001) includes 3 highly durable UV LED lights and 1 UV and White Light meter: a MB 3.0 Zeus with Athena, a UVG3 2.0 Midlight and a UVG5 2.0 Midlight. However, the kit is customizable and you may replace any light within the same series. For example, if you do inspection work for Rolls-Royce you may want to replace a UVG3 2.0 Midlight with a UVG3 2.0 Floodlight that has been tested to comply with Rolls-Royce RRES 90061.

MB 3.0 Zeus has been tested to comply with both ASTM E3022-18 and ISO 3059-12 standards as well as the Rolls-Royce Engineering Specification RRES 90061 and Airbus AITM6-1001 Test Method. It generates an intensity of approximately 4 500 μw/cm2 at 38 cm (15 inches) and is equipped with a white light LED for after inspection. The running time of the battery version is 3.5 hours. The beam size generated above 1 000 μw/cm2 is approximately 9 inches / 22 cm. An Athena spray can holder is attached on MB 3.0 Zeus. It can hold any Aerosol NDT brand and has a trigger for use real time as the UV-A light.

UVG5 2.0 Midlight headlight has an intensity at the center of ≈ 9,000 μw/cm2, generating a beam profile of approximately 3.8 inches / 9.5 cm above 1 000 μw/cm2, and is in compliance with ASTM E3022-18, Pratt and Whitney and USAF requirements. The battery life for UVG5 2.0 Midlight (L128) is 14 hours.

UVG3 2.0 Midlight flashlight has an intensity at the center of ≈ 9,000 μw/cm2, generating a beam profile of approximately 3.8 inches / 9.5 cm above 1 000 μw/cm2, and is in compliance with ASTM E3022-18, Pratt and Whitney and USAF requirements. The battery life for UVG3 2.0 Midlight (L135) is 8 hours.

Apollo 2.0 dual UV and white light meter is an instrument for accurate measurement of UV irradiation and visible illuminance. It is wireless system and consists of one reader unit and one wireless sensor unit. It comes calibrated from an ISO/IEC 17025 calibration laboratory.

Members of the US military should ask for PN: K002 as it has been customized to meet USAF requirements.

 

 

 

The Inspector kit (PN: K001) is a customizable kit to fulfill any field inspection. It fulfills your preferred and most convenient way to contact an inspection. Let it be a yoke inspection that requires aerosols and UV LED light to be used with one hand, a quick inspection with a UV LED flashlight or a UV LED headlight where no hands are needed. You have everything you need in a Single kit. No NDT manufacturer in the world can offer this solution.

The same charger can be used to charge the MB 3.0 and the UVG5 2.0, without removing the batteries. A customized carrying case is provided that fits all lights, meters and accessories. There is also space for 4 aerosol cans that can be used with MB 3.0 Athena spray can holder.

Overview

The inspector kit (PN: K001) includes 3 UV LED lights and 1 UV and White Light meter along with all charging accessories and a carrying case. It also has 4 pockets that fit any Aerosol brand. This kit fulfills all requirements for field inspections. The 3 UV LED lights consist of a handheld UV LED light with an aerosol spray can holder attached, a UV LED headlight and a UV LED flashlight.

Even though the standard kit includes MB 3.0 Zeus with Athena, UVG3 2.0 Midlight and a UVG5 2.0 Midlight, the kit is customizable and you may replace any light within the same series. For example, if you work for Rolls-Royce you may want to replace UVG3 2.0 Midlight with UVG3 2.0 Floodlight.

VIEW INSPECTOR KIT VIDEO

Members of the US military should ask for PN: K002 as it has been customized to meet USAF requirements. This kit includes MB 3.0 Atlas with Athena (PN: L126), UVG3 2.0 Midlight (PN: L135), UVG5 2.0 Midlight (PN: L129) and Apollo 1.0 (PN: M500). 

The Inspector kit (PN: K001) is a customizable kit to fulfill any field inspection, with any UV light certifications your client requires you to use. It fulfills your preferred and most convenient way to contact an inspection. Let it be a yoke inspection that helps you use aerosols and UV LED light with one hand, a quick inspection with a UV LED flashlight or a UV LED headlight where no hands are needed to operate. You have everything you need in a Single kit.

This product has no accessories.
This product does not have software options.
Login to NOMO

NOMO Deals

Get the best offers in NDT products.