NOVOTEST Shore Durometer TS-A
Only by Request
Shore Durometer is one of the modern non-destructive testing instruments for measuring the hardness value of different materials at the workshops and laboratories. This device can be used at the radio instruments industry, mechanical engineering and other areas of modern industry.
Shore Durometer NOVOTEST TS-A corresponds to the following standards: ISO-7619 and ISO-868, DIN53505, ASTM D2240 and JIS K7215.
Soft plastic, printed circuit boards, glass, elastomers, fibers, soft rubber, leather, resin, wax, neoprin, butyl, silicone, vinyl are typical testing objects of Shore Durometer. The principle of determining the hardness value of materials is based on the calculation the value of material’s resistance to the penetration of the indenter with a preset load.
ADVANTAGES.
Shore Durometer NOVOTEST TS-A is produced in two versions, A and D.
Shore Durometer A is designed for testing the following materials: soft rubber, elastomers, silicone, neoprin, vinyl, butyl, nitrile, soft plastics, leather, wax, etc.
Shore Durometer D is designed for testing products from rubber, resin, glass, PCB, fibers, plastics, etc.
Measurement range, Shore scale | from 0 to 100 |
Interval of scale indicator, Shore scale | 1,0 |
Measurement accuracy | ± 1,0 scale division |
Dimensions, mm | 115*60*25 |
Weight, kg, no more | 0,5 |
Related products
Defelsko PosiTector BHI Barcol Hardness Impressor for NDT
Only by Request Read moreUCI Hardness Tester alphaDUR II SPS
Only by Request Read moreQH5 D Leeb Portable Hardness Tester
Only by Request Read moreEchoTrack™ ET1-MV: Medium Viscosity; 1 gallon/3.8 liter cubitainer, one refillable bottle
Only by Request Read more
Copyright © 2020 Nomogroup, Inc.
All rights reserved.
21113 Johnson St. Ste 130
Pembroke Pines FL 33029 – USA
+1 (954) 320.6991
[email protected]
Designed by Minima Studio