Special Version of the Phased Array Calibration Standard (PACS™) with 0.060″ diameter Side-drilled Holes for use with AWS requirements. Block is used for angle beam verification, probe angle exit point, calibration for wedge delay, sensitivity,…
Available In: Inch
| Material | 1018 Steel, 304 Stainless Steel, 7075-T6 Aluminum |
|---|---|
| Include Case | None, Wood Case |
| Include Dimensional Report | No, Yes |
Special Version of the Phased Array Calibration Standard (PACS™) with 0.060″ diameter Side-drilled Holes for use with AWS requirements. Block is used for angle beam verification, probe angle exit point, calibration for wedge delay, sensitivity, DAC/TCG for thicknesses up to 2″.
The three radii (0.500, 1.000, 2.000″) allow for exit point verification, velocity, and sound path calculations. Block contains five holes at 0.060″ diameter drilled through the 1.000″ width, located at 0.100, 0.200, 0.400, 0.600, 0.800, 1.200, 1.400, 1.600, 1.800, and 1.900″ from the respective scanning surface. Generous hole spacing eliminated “ghost” images from adjacent holes. Also includes an engraved scale from 30° to 70° associated with the 0.800″ hole for beam angle verification.
Dimensions: 18.0″ x 2.0″ x 1.0″
Alloy: 1018 Steel, Nickel-plated
In accordance with PH Tool Drawing No. 10330. Designed jointly by PH Tool LLC and Davis NDE.
Davis NDE, Inc and the University of Ultrasonics, in partnership with PH Tool, developed this universal calibration block for use in Phased Array Calibrations and Examinations. Phased Array training for use with the PACS™ block is available by contacting the University of Ultrasonics.
Designed by Minima Studio
