A QC5 N is an advanced dry coating thickness gauge used to measure the thickness of coatings and platings applied over Non-Ferrous substrates. Measure the thickness of paint, varnish, laquer, niquel, zinc, chrome and much more with repetitive and accurate results.
All QC5 models include 9 calibration modes, calibration memories, a continuous measurement mode, graphics, statistics and much more.
| dmq QC5 N standard configuration | |||
| • | dmq QC5 N electronic unit | ||
| • | dmq straight Non-Ferrous probe | ||
| • | Non-Ferrous base | ||
| • | 3 shims for calibration | ||
| • | Printed user manual | ||
| • | High impact carrying case | ||
| • | Certificate of conformity | ||
Modes:
Magnetic induction
Range:
0 to 15mm / 0 to 5.905in
*Depending on probe and material
Resolution:
Up to 99.9µm, 0.1µm or up to 4.99Mil, 0.01Mil
Above 100µm, 1µm or above 5Mil, 0.1Mil
Precision:
±1 at 3% +2μm (+0.07Mil) *Depending on probe
Measuring Velocity:
Approximately 99 measurements per minute
9 modes:
Base & 1 point
Base & 2 point
Muiltipoint
1 point
Base
ISO (ISO 19840)
SSPC (SSPC-PA2)
SWE (SS 184160)
AUS (AS 3894.3)
Set Number of Samples
User defined except for specific calibration modes
Memory
Save commonly used shim values
Type of Base
Permanent indicator
Counter Configuration
Measure number of layers in a coating
Histogram Range
User defined high and low values
Measurement Modes
Continuous and Hold Last
Differential Mode:
Difference between actual measurement and reference value
Internal Clock:
Date and Time (Selectable format)
Types:
Minimum, maximum, average, range, standard deviation, coefficient of variation
Error:
High, Low, High%, Low% based on high and low alarm settings
Calculations are based on stored values only
Purchase licenses to upgrade to a QC5 DLN, QC5 C or
QC5 DLC
For QC5 C and QC5 DLC models you need to purchase a combined probe
Low & High:
User defined
Alarm Types:
Visible: flashing backlight or irregular digits
Audible: intermitent beep
Digits:
17mm / 0.66in tall
Graphic LCD:
128×64 pixels
Viewable Area:
45 x 30mm / 1.77 x 1.18in
Backlight:
LED backlight (ON, OFF, Auto)
Contrast:
Digital 30 steps
Languages:
English, Spanish, Portuguese
Menu Screens:
Icon based
User ID:
Personal information with password protection
Type:
Non-Ferrous
Probe Range:
Non-Ferrous, 0 to 1500µm or 0.025 to 19.999in
Resolution:
Up to 99.9µm, 0.1µm or up to 4.99Mil, 0.01Mil
Above 100µm, 1µm or above 5Mil, 0.1Mil
Material Base:
Non-Ferrous: Aluminum, Copper, Bronze, etc.
Minimum Base Thickness:
Non-Ferrous: 0.3mm or 0.01in
Minimum Convex Radius:
Non-Ferrous: 5mm or 0.19in
Minimum Concave Radius:
Non-Ferrous: 25mm or 0.98in
Minimum Sample Diameter:
5mm or 0.19in
Metric:
Microns (µm)
Millimeters (mm)
Imperial:
Inches (Mil)
Storage:
Up to 32000 readings
Data Transfer:
NOT AVAILABLE
Organization:
8 files with 10 character alphanumeric naming
Capture Modes:
Manual: Touch the “Store” key to store values
Single: Automatic each time the probe is coupled
Continuous: Automatic while the proble is coupled
Date and Time Register:
Register day and time
Connectivity:
USB (cable included) or RS232 (optional cable)
Touch-Sense Keypad:
No mechanical parts
Keypad:
Sensitivity adjustment
Auto pressure detection
Auto scrolling detection
Dimensions:
H: 117mm / 4.60in
L: 78.74mm / 3.10in
W: 24mm / 0.94in
Weight:
200g / 7.05oz with batteries
Working Temperature:
-10°C to 50°C / 14°F to 122°F
Storage Temperature:
-20°C to 60°C / -4°F to 140°F
Enclosure:
High impact ABS with rubber sides for easy grip
Front Panel:
Polycarbonate
Batteries:
2 x AA 1.5v Alkaline
2 x AA 1.2v Ni-MH Rechargeable
Battery Life:
100 hours with backlight off
Battery Indicator:
On all screens with a low level alarm
Auto-Off:
Programmable 1 to 120 minutes
Electronic Unit:
5 year limited
Probes:
6 months
Designed by Minima Studio
