Configure any Pit Gage kit to your requirements and know that for any surface, be it pipe, tank, vessels, the Pit Gage will exceed your inspection needs.
Measure surface variations with precision and ease. Offering a rotating digital display and multiple configuration lengths, the PIT GAGE is the essential tool for manual pit inspection. Kits come standard with two or four non-magnetic extension arms. Optional magnetic arms (purchased separately) can be added to allow the Gage to be mounted to a ferrous scan surface, even upside down.
Digital indicator (batteries included)
Centre base
Blind side base
Non-magnetic Extension arms (2 or 4 arm kit) x2
Indicator tip x2
Lithium coin cell battery x2
Rugged carrying case
User manual
The easy readability and rotating face of the digital indicator ensures accurate readings, even when up-side-down.
The standard mounting apparatus for the digital indicator.
The precise measurement point of the tool. A spare indicator tip is included with this kit.
Extend the length of the PIT GAGE with additional non-magnetic extension arms.
Use the blind side base to take one-sided pit depth measurements in limited access applications (flanges, elbows, large weld caps, etc.).
Freedom to scan anywhere, magnetic arms (purchased separately) combined with the rotating digital indicator mean inverted scanning is a snap.
Digital Indicator, Range: 0 – 25 mm (0 – 1 in)
Digital Indicator, Resolution: 0.01 mm (0.0005 in)
Digital Indicator, Stem Diameter: 9.52 mm (.375 in)
Battery Requirements: CR2032 lithium coin cell x2 (included)
Centre Base, Length: 11.56 cm (4.55 in)
Blind Side Base, Length: 9.53 cm (3.75 in)
Extension Arm, Length: 17.59 cm (6.93 in)
Pit Gage, Height: 15.04 cm cm (5.92 in)
Pit Gage, Width: 5.81 cm (2.29 in)
Shipping weight (2 arm kit): 1.17 kg (2.6 lb)
Shipping weight (4 arm kit): 1.54 kg (3.4 lb)
Diameter: 0.914 mm (0.036 in)
Operating Environment: -10° C (14° F) to 50° C (122° F)
Environmental Sealing: Waterproof (IP67)
Designed by Minima Studio