OKOndt Straight Weld Probe (Bridge)
Have questions about buying this product?
Straight Weld Probe (Bridge)
This product does not have additional information.
This product has no features.
| Designation | Tip Ø ‘D’, in/mm | Length, in/mm | Frequency, kHz | Connector | Material | Defects under paint coating | Subsurface defects |
| WLD100K3×.2DA0 | .2/5.1 | 3/75 | 100-1000 | Lemo 04 | Fe | up to 0.3 mm | + |
| WLD100K3×.35DA0 | .35/8.9 | 3/75 | 100-1000 | Fe | up to 0.5 mm | + | |
| WLD100K3×.43DA0 | .43/10.9 | 3/75 | 100-1000 | Fe | up to 0.5 mm | + | |
| WLD100K3×.63DA0 | .63/16 | 3/75 | 100-600 | Fe | up to 1 mm | + | |
| WLD100K3×1DA0 | 1/25.4 | 3/75 | 100-600 | Fe | up to 1.5 mm | + |
<
| WLD | 100K | 3 | × | .63D | A | 0 |
| 1 | 2 | 3 | 4 | 5 | 6 |
- WLD – weld probe for weld joints testing.
- Probe frequency:
“HZ” designates the Hz range; “К” designates the kHz range; “М” designates the MHz range.
- Probe length, in. Standard length 3″ (75 mm), by default the size is specified in inches. Can be changed upon request.
- The probe tip diameter, inches.
- Probe type designation “А”. “А” – Absolute.
- Probe modification number.
This product has no accessories.
This product does not have software options.
Downloads
